The following list outlines hardware that the OpenBSD project could use.
There are a number of reasons why developers need hardware, and it is important
to first of all realize these reasons:
If you do not own these devices, but want to help us, we recommend you
search on eBay for the devices. If
you do the bidding and then get the device shipped to us, it really
helps us. It is better if developers develop, and skip the bidding process,
since any time saved can be spent on improving OpenBSD instead.
- To support a specific device, normally one which is more rare or new.
- To be part of their development environment.
- Some types of machines may be different in some way
(i.e. big-endian or unsigned-char) and ensure that developers
write code more carefully.
- That said, space or power may be at a premium for some people.
If it is clear which specific developer should be contacted, please do
so directly. Otherwise contact Theo de Raadt
who will pass on the message to whichever developers are in need.
Please be very clear as to where you are located!! For larger items this
can be very important.
General device requirements
We try to spread these types of devices around our development community.
- Laptops. These die often enough that as a group our needier
developers need help replacing about 2-3 per year.
- Apple Mac powerpc equipment.
- HP J6750 machines (J6700 is the second best choice).
- Faster & smaller sparc64 machines, for instance 1U rack mount
machines. It is important to spread sparc64 around the development
community, since it is the most strict platform for detecting non-portable
or buggy code.
- Any amd64 or faster i386 hardware which comes available.
- We generally do not need older and "very common" ISA/PCI equipment, since
our developers will generally have gotten their hands on these in the
10Gb Ethernet Support
David Gwynne (in Australia), Claudio Jeker (in Switzerland), and
Carlos Cardenas (in United States) are working on support for
10 Gigabit Ethernet devices. These developers would like the
following hardware to help development:
Contact email@example.com, firstname.lastname@example.org, and email@example.com.
- 10GbaseSR SFP+ modules for use in 10Gb network cards
- Switches with 10Gb modules for hacking
- Direct Attach (SFP+) and CX4 cabling
- optical cabling with LC connectors (for 10GbaseSR and 10GbaseLR)
- Broadcom, Emulex (ServerEngines) and QLogic 10Gb NICs for driver
Trunk/LACP Support for the Data Center
Carlos Cardenas (in United States) is working on LACP support for data
center deployments. This requires each host to have a LACP trunk to two
switches that are in a MLAG configuration. This developer would like the
following hardware to help development:
- 2 x Arista DCS-7150S-24, 24-Port 10G SFP+, AC Power
- 2 x Arista OEM 10G SFP+ SR Optics (LC Connections)
- 2 x Arista OEM 1.5m 10G SFP+ DAC Cables
- 2 x Arista OEM 1.5m 10G SFP+ AOC Cables
- 2 x Edge-Core AS5712-54X with Cumulus Linux, 48-Port 10G SFP+, AC Power
- 2 x Cisco C3172PQ-10GX, 48-Port 10G SFP+, AC Power
- 2 x Cisco OEM 10G SFP+ SR Optics (LC Connections)
- 2 x Cisco OEM 1.5m 10G SFP+ DAC Cables
- 2 x Cisco OEM 1.5m 10G SFP+ AOC Cables
- 2 x Juniper QFX5100-48S, 48-Port 10G SFP+, AC Power
- 2 x Juniper OEM 10G SFP+ SR Optics (LC Connections)
- 2 x Juniper OEM 1.5m 10G SFP+ DAC Cables
- 2 x Juniper OEM 1.5m 10G SFP+ AOC Cables
Notes when contributing switches
To help the developer integrate the hardware quickly,
- Please ensure all cables match the developer's locale (US plugs)
- PSUs are AC Power unless explicitly requesting DC
- Software/Firmware versions are the same on each pair of switches.
Version discrepancies can prevent MLAG from working.
Specific platform requests by our developers
Specific devices and equipment needed by our developers
- Nexus 9k switch.
- Sun StorEdge MultiPack-FC desktop array needed in Assen, The Netherlands.
- A variety pack of shortish (SFP connectors on at least one end) fibers
wanted in Calgary.
- A PCIe to USB 2.0+1.1 card supported by ehci(4) and ohci(4) is wanted
in France or Germany, for USB MP development.
- A (supported!) umb(4) usb stick is needed in Den Haag, The Netherlands.
- A laptop is wanted in Cergy, France. Contact firstname.lastname@example.org.
- USB TRNG harware such as Araneus Alea II
Noise is wanted in Colorado and the Netherlands. Contact
email@example.com or firstname.lastname@example.org.
- Various SO-DIMM DDR2 PC-5300 or PC-6400 modules of 4GB are needed in Spain.
- MACCHIATObin board, 1U rackmount case and power supply; or an OverDrive
3000 needed in Heemstede, the Netherlands. Contact email@example.com.
- Ubiquity Unifi Ufo / Unifi AP Pro are needed for wifi driver debugging in Berlin, Germany.